…search. I need a PCMCIA card that will just work with my Dell M65, my Thinkpad A31 both using the 2.6.24-23-generic. The official list says I got it already (INEO, External SATA, 32bits Cardbus is making the *right* sata_sil driver load), but when I start computer with new 1TB Seagate 7600.11 attached, no drive. Might be drive speed issue.
blkid produces no record of the drive unless I connect it via usb cable (that’s how I got ext3 format on it).

92: udi = '/org/freedesktop/Hal/devices/pci_1095_3512'
pci.device_protocol = 0 (0x0)
pci.vendor = 'Silicon Image, Inc.'
linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:01.0/0000:04:00.0'
info.subsystem = 'pci'
info.vendor = 'Silicon Image, Inc.'
info.parent = '/org/freedesktop/Hal/devices/pci_1217_7135'
pci.product = 'SiI 3512 [SATALink/SATARaid] Serial ATA Controller'
info.product = 'SiI 3512 [SATALink/SATARaid] Serial ATA Controller'
pci.linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1e.0/0000:03:01.0/0000:04:00.0'
pci.subsys_vendor = 'Silicon Image, Inc.'
info.udi = '/org/freedesktop/Hal/devices/pci_1095_3512'
pci.product_id = 13586 (0x3512)
linux.hotplug_type = 2 (0x2)
pci.vendor_id = 4245 (0x1095)
linux.subsystem = 'pci'
info.linux.driver = 'sata_sil'
pci.subsys_product_id = 13586 (0x3512)
pci.subsys_vendor_id = 4245 (0x1095)
pci.subsys_product = 'SiI 3512 SATALink Controller'
pci.device_class = 1 (0x1)
pci.device_subclass = 128 (0x80)

yenta and sata_sil are 2 of 3 interrupts on 19

At least I am learning a lot about:

fstab, mtab and things like hwinfolspci -v and lspci -vvnn
Serial ATA (SATA) Linux hardware/driver status report
Silicon Image 3124 family

script mount iso…

20090120, 04

…made easy. I have been using this for months on hardy, and it seems to work on intrepid too.

Mount and Unmout ISO images without burning them — Ubuntu Geek
Some times you want to use iSO images without burning them.If you don’t want to waste your CD’s/DVD’s here is the simple possible solutions using these tips you can mount and unmount ISO images without burning them.

…for change is ongoing. Though the slide into oppressive regulation and the crippling of freedom may seem rapid and permanent, we still have reason to support organizations that take the initiative to educate, serve and represent.

Creative Freedom Foundation: Home